|
|
Post by dredly on Mar 31, 2006 16:40:18 GMT -5
Okay so I have my Nightkast set to factory Fast, and supposedly you can't "screw up the timing" but I'm pretty sure I did.
I was shooting a bit and it was working pretty damn good, I got a few bounced trigger pulls but other than that it was all sweet.
then I thought I hit some serious shootdown... paintballs were going maybe 10 feet and the gun was cocking real slow and it looked like the ram pressure was off cause it was staying open for a long time. (Back block slowly going forward)
I managed to kill over 1500 PSI of air in less then a hopper of paint... anyone give me some help here?
|
|
|
|
Post by hwayhzrd on Mar 31, 2006 16:58:27 GMT -5
Dang, that sucks. This is why I won't own one of those things.
Good luck sorting it out.
|
|
|
|
Post by nobody on Mar 31, 2006 17:26:04 GMT -5
the nitekast has the Eblade on it right? even if its the WorrBlade, they are the same thing.
if yes, then i can't help you and you can't blame Shorty, cause he was 3 states away.
but i will speculate that either the noid is blown(and not in the good way), or you have a problem with the ram. take off the hoses and make sure that nothing is blocking them. air it up and see if you can hear any hissing from the noid housing. also, bring the settings back to default. either your dwell is up to high, or way low. you can also check the LPR. it could have gone bad, as its not feeding the noid or ram enough air.
but those are just guesses.
|
|
|
|
Post by dredly on Mar 31, 2006 18:00:50 GMT -5
nope, no leaks, i checked that.
I did reset to factory settings.
the game came from DK, which means it was in DC, which means i CAN blame shorty
|
|
|
|
Post by freelance on Mar 31, 2006 18:05:15 GMT -5
YYYYYYYYYYYYYYYYYYYEEEEEEEEEEEEEEEEEEEEEEEEEEESSSSSSSSSSSSSSSSSSSSSSSSSSSS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
My sacrifices have paid off!!!!!!!!!!!!!!!!!!!!
Fear me now!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
|
|
|
|
Post by dredly on Mar 31, 2006 18:24:03 GMT -5
so I jsut went and aired it up again and it shot great for about 25 - 30 shots and then started doing the same thing again... its almost like massive shootdown to the point where there is just enough air getting through to work the pneumatics....
is that possible?
|
|
|
|
Post by evilelvis on Mar 31, 2006 18:36:54 GMT -5
Yep BTW my A-5 is working just fine. Have fun with your AutoPaper weight since it's all that' hunk of alluminum & plastic is worth now.
|
|
|
|
Post by Rock Slide on Apr 1, 2006 2:16:02 GMT -5
I think he got hold of a Westwood... pssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss........................
My A-5 is working great too!
|
|
|
|
Post by freelance on Apr 1, 2006 6:31:57 GMT -5
My A-5 AND Pirahana are working just fine. Including my 2 Pro-carbs, my PTExtreme, Black Max and my Automag (Thanks to Nobody). I can't imagine what the problem is?  ? Out here, Free Lance |
|
|
|
Post by pistolpete on Apr 1, 2006 6:42:12 GMT -5
Dredly, whatever you do DON'T TRY TO TIME IT!!!! don't try to adjust it, don't mess with the setting in the grip. Try asking over to the Tinkers Guild you should be able to get some good answers there. www.network54.com/Forum/9013/PS: If I had to guess I would say there is a problem with your air, maybe your reg is mesed up? Tank getting low? |
|
|
|
Post by freelance on Apr 1, 2006 11:26:24 GMT -5
Maybe Dredly is the problem? Operator Error? ? Out here, Free Lance |
|
|
|
Post by evilelvis on Apr 1, 2006 16:46:48 GMT -5
Maybe Dredly is the problem? Operator Error? ? We have a Winner!! |
|
|
|
Post by nobody on Apr 1, 2006 18:58:53 GMT -5
that's the best thing you should do. listen to Pete, he bring us cow. he's smart. no one likes him, but he found a place to our hearts by feeding us steak. he smart  |
|
|
|
Post by BigAl on Apr 1, 2006 23:34:14 GMT -5
I think he got hold of a Westwood... pssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss........................My A-5 is working great too! Hey Rock, BigAl says to bite him. |
|
|
|
Post by skunkwerx on Apr 3, 2006 6:43:54 GMT -5
Maybe low pressure reg?? If not the Reg itself it's starved for air, therefor slow cycling.
Pinched Low P air hose.
When the trigger frame is attached back to the gun (Any gun that uses a Solenoid) the Low P Air hoses can get pinched, causing really weird little problems.
At any rate, it sounds like it's on the Air side of the house.
Leave the factory default settings in place, and go over the Air circuits.
|
|
|
|
Post by bobapunk on Apr 4, 2006 8:32:27 GMT -5
I got a SL-68II here that works great. I can lend it to you if you need it I never seem to use it anymore because I never have any problems with my A-5!  |
|
|
|
Post by freelance on Apr 4, 2006 8:46:10 GMT -5
You wouldn't want to part company with that, would you?
Out here,
Free Lance
|
|
|
|
Post by bobapunk on Apr 4, 2006 21:26:37 GMT -5
My SL?? Not really, I may consider a trade for a Phantom |
|
|
|
Post by evilelvis on Apr 4, 2006 22:27:37 GMT -5
HA HA HA HA HA HA HA HA HA HA that's like a Bubba Slap! .. counts like ten bitch slaps
|
|
|
|
Post by pistolpete on Apr 5, 2006 3:03:07 GMT -5
BWaaaaahahahaha The Phantom Bitch strikes again
|
|
|
|
Post by freelance on Apr 5, 2006 9:06:10 GMT -5
Yea, and now everyone knows in two languages that I'm missing my Phantom.....
WHERE'S MY PHANTOM, PUNTA-BITCH!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
|
|
|
|
Post by pistolpete on Apr 5, 2006 15:29:53 GMT -5
Wheres ma chienne fantôme ?
Wheres mein Phantomweibchen?
Wheres la mia femmina fantasma?
Wheres моя фантомная сука?
Heres a bunch more, sorry I couldn't get it translated to Korean.
|
|
?
